MANUFACTURE
STREAMLIGHT
Specification
- SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
- High-performance, anti-static, thermoplastic material resistant to chemicals and solvents
- "Captured locking" set screw will not back out -prevents FOD (Foreign Object Debris)
- Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment
- Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw
- Powered by 3 "C" alkaline batteries (sold separately)
- C4® LED technology - impervious to shock with a 50,000 hour lifetime - provides 150 lumens; runs 18 hours
- Sealed switch design protects it from corrosion caused by battery leakage
- Lightly textured parabolic reflector produces a smooth, uniform beam with optimum peripheral illumination
- Regulated run time provides consistent performance throughout battery life
- Larger size makes the 3C ProPolymer HAZ-LO ideally suited for situations where gloves are typically worn
- O-ring sealed, dust-proof, water-tight enclosure
- IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes; IPX4 for water spray
- 3 meter impact resistance tested
- 9.30 in. (23.62 cm); 13.9 oz (394 grams) with batteries (batteries sold separately)
- Limited lifetime warranty
- ATEX-rated for Category 1GD (Zone 0, 20) locations. IECEx-rated for Zone 0 and 20, Group IIC and IIIC locations. For use in places with an explosive gas atmosphere (other than mines susceptible to firedamp) that is present continually or for longer periods. It has a maximum surface temperature of <135°C.
- Assembled in the USA
- RoHS compliant
RECOMMENDED
FOR YOU
FOR YOU
